|
| |
TM 9-2320-360-34-1
16-2. CAB REPLACEMENT (CONT)
(54)
Remove two screws (125), two screws
(126), and spacers (129) from cab mounts
(8, 101, and 130).
b.
Installation
(1)
Attach lifting chain (1) to three cab lifting
eyes (2). Refer to table 16-1 for proper
chain lengths.
(2)
Support cab (3) with suitable lifting device
and lifting chain.
NOTE
Rear cab mount screws have square
plate welded on them.
(3)
Install two screws (4) and two screws (5)
on cab mounts (6, 7, and 8).
(4)
Secure four spacers (9) on two screws (4)
and two screws (5) with masking tape.
16-18
|
