|
| |
TM 9-2320-360-34-1
16-2. CAB REPLACEMENT
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Air system drained (TM 9-2320-360-10).
Grease, Anticorrosion (Item 31, Appendix B)
Spare tire removed (TM 9-2320-360-10).
Rope, 50 Ft (Item 53, Appendix B)
Steering reservoir drained
Tags, Identification (Item 56, Appendix B)
(LO 9-2320-360-12).
Tape, Masking (Item 58, Appendix B)
Cooling system drained (TM 9-2320-360-20).
Ties, Cable, Plastic (Item 60, Appendix B)
Batteries disconnected (TM 9-2320-360-20).
Locknuts (4) (Item 87, Appendix F)
Access panels removed
Locknuts (4) (Item 91, Appendix F)
(TM 9-2320-360-20).
Locknuts (2) (Item 96, Appendix F)
Air cleaner removed (TM 9-2320-360-20).
Locknut (Item 80, Appendix F)
Lockwashers (4) (Item 119, Appendix F)
Tools and Special Tools
Lockwasher (Item 116, Appendix F)
Tool Kit, Genl Mech (Item 211, Appendix E)
Pin, Cotter (Item 216, Appendix F)
Jackstands (4) (Item 98, Appendix E)
Pin, Cotter (Item 218, Appendix F)
Sling Assembly (Item 167, Appendix E)
Packings, Preformed (2) (Item 165, Appendix F)
Wrench, Combination, 1-3/8 In. (Item 222,
Packing, Preformed (Item 163, Appendix F)
Appendix E)
Packing, Preformed (Item 164, Appendix F)
Wrench, Combination, 2 In. (Item 226,
Appendix E)
Special Environmental Conditions
Wrench, Open-End, 1-5/8 and 1-13/16 In.
HET Tractor on hard, level surface.
(Item 233, Appendix E)
Wrench, Open-End, 1-7/8 and 1-11/16 In.
Personnel Required
(Item 234, Appendix E)
Three
Wrench Set, Socket, 3/4 In. Drive (Item 240,
Appendix E)
Wrench, Torque, 0-600 Lb-Ft (Item 242,
Appendix E)
Wrench, Torque, 0-75 Lb-In. (Item 246,
Appendix E)
a. Removal
NOTE
Vehicle maintenance time can be reduced by using
three personnel on steps (1) thru (11), (12) thru (35),
and (36) thru (47).
16-2
|
