|
| |
TM 9-2320-360-34-1
15-3. LATERAL TORQUE ROD REPLACEMENT (CONT)
NOTE
It may be necessary to strike torque
rod tower with a hammer while
applying pressure with hydraulic
jack.
(12) Press lateral torque rod (15) loose from axle (18)
with aid of assistant.
(13) Remove locknut (14), washer (19), and lateral
torque rod (15) from axle (18). Discard locknut.
NOTE
Number of spacers will vary.
Note number of spacers to aid in
installation.
(14) Remove two locknuts (20), screw (21), screw
(22), bracket (23), spacer(s) (24), and lateral
torque rod (15) from frame (12) with aid of
assistant. Discard locknuts.
b. Installation
NOTE
Ride height is measured between
axle no. 3 housing and bottom of
frame.
(1)
Raise differential (1) with floor jack (2) to
achieve 9 in. (23 cm) ride height clearance.
(2)
Support differential (1) with jackstands (3).
15-12
|
