|
| |
TM 9-2320-360-34-1
(5) Place floor jack (9) under differential (10).
(6) Raise differential (10) with floor jack (9) and
lower jackstands (11).
(7) Lower differential (10) with floor jack (9) to
achieve 13 in. (33 cm) between bottom of frame
(12) and top of axle housing (13).
(8) Support differential (10) with jackstands (11).
(9) Loosen locknut (14) until flush with end of
threads on lateral torque rod (15).
(10) Position hydraulic hand jack (16) between right
frame hanger (17) and lateral torque rod (15).
WARNING
Torque rod will release suddenly.
Keep out from under torque rod and
hydraulic hand Jack. Failure to
comply may result In Injury to
personnel.
CAUTION
Hydraulic
hand
jack
must
be
supported with lifting straps prior to
removing torque rod. Failure to
comply may result in damage to tools
or equipment.
(11)
Support hydraulic hand jack (16) with lifting straps.
15-11
|
