|
| |
TM 9-2320-360-34-1
WARNING
Keep hands clear of spring and axle
housing when lowering axle. Failure
to comply may result In serious
Injury to personnel.
NOTE
· Spring center bolt must align with
hole in bottom of axle.
· Hydraulic hand jack can be used to
position axle.
(24)
Lower axle (12) with floor jack (11) onto spring
(2) with aid of assistant.
(25)
Coat threads of two U-bolts (26) with lubricating
oil.
NOTE
· U-bolts have a slight bow and must
be installed so they bow toward
center of spring.
· Spring center bolt must align with
hole in spring shoe.
(26) Position spring shoe (27) and two U-bolts (26)
on spring (2).
(27) Install four new lockwashers (28) and nuts (29)
on U-bolts (26). Torque to 450-550 Ib-ft (610-
746 Nm).
(28) Raise HET Tractor with floor jack (11) and
remove two jackstands (25) from under front tow
eyes (30).
(29) Position two jackstands (25) under axle (12).
(30) Lower HET Tractor onto jackstands (25) and
remove floor jack (11).
c. Follow-On Maintenance
(1) Grease spring pins (LO 9-2320-360-12).
(2) Install front axle stop (TM 9-2320-360-20).
(3) Install front wheel/tires (TM 9-2320-360-20).
(4) Install front bumper (TM 9-2320-360-20).
Change 1 15-9
|
