|
| |
TM 9-2320-360-34-1
15-2. FRONT SPRING REPAIR
This task covers:
a. Removal
c. Follow-On Maintenance
b. Installation
INITIAL SETUP
Equipment Conditions
Materials/Parts
Front wheel/tires removed
Oil, Lubricating (item 48, Appendix B)
(TM 9-2320-360-20)
Lockwashers (4) (Item 133, Appendix F)
Front bumper removed (TM 9-2320-360-20).
Lockwashers (3) (Item 122, Appendix F)
Front axle stop removed (TM 9-2320-360-20).
Personnel Required
Tools and Special Tools
Two
Tool Kit, Genl Mech (Item 202, Appendix E)
Jack, Floor (Item 90, Appendix E)
Jackstands (3) (Item 93, Appendix E)
Wrench Set, Socket, 3/4 In. Drive (Item 231,
Appendix E)
Wrench, Combination, 1-5/16 In.
(Item 216, Appendix E)
Wrench, Torque, 0-600 Lb-Ft (Item 233,
Appendix E)
Wrench, Torque, 0-175 Lb-Ft (item 236,
Appendix E)
a.
Removal
NOTE
Left and right springs are replaced
the same way. Right spring is
shown.
(1)
Position floor jack (1) under axle (2) and
raise HET Tractor.
(2)
Support frame (3) under front tow eyes (4)
with two jackstands (5) and support axle
(2) with jackstand (5).
15-2
|
