|
| |
TM 9-2320-360-20-1
Check top steering shafts for looseness and damage
TEE BOX TEST
(1)
Remove screw and locknut from lower yoke of top
steering shaft. Discard locknut
(2)
Remove yoke from top tee box shaft
(3)
Remove screw and locknut from yoke on front steering
shaft. Discard locknut.
(4)
Remove yoke from front tee box shaft.
(5)
Remove screw and locknut from yoke on rear steering
shaft. Discard locknut.
(6)
Remove yoke from rear tee box shaft
(7)
Turn top tee box shaft to check for binding. Replace
tee box (para 13-8) if it fails to turn smoothly or if it
binds when top shaft is turned.
(8)
Align key on rear tee box shaft with slot In steering
shaft yoke
(9)
Install yoke on rear tee box shaft with screw and new
locknut.
(10) Align key on front tee box shaft with slot in steering
shaft yoke.
(11) Install yoke on front tee box shaft with screw and new
locknut.
(12) Align key on top tee box shaft with slot in steering shaft
yoke.
(13) lnstall yoke on top tee box shaft with screw and new
locknut
Change 2 2-907
|
