|
| |
TM 9-2320-360-20-1
Check pitman arms and drag links for
damage, and loose or missing
mounting hardware. Refer to (LO
9-2320-360-12) to lubricate steering
linkage.
Refer to para 11-2 to adjust brakes.
Check tee box for damage,
and for loose or missing
mounting hardware.
TEE BOX TEST
(1)
Remove screw and locknut from lower yoke of top steering
shaft Discard locknut.
(2)
Remove yoke from top tee box shaft.
(3)
Remove screw and locknut from yoke on front steering shaft.
Discard locknut.
(4)
Remove yoke from front tee box shaft.
(5)
Remove screw and locknut from yoke on rear steering shaft.
Discard locknut.
(6)
Remove yoke from rear tee box shaft.
(7)
Turn top tee box shaft to check for binding. Replace tee box
(para 13-8) if it fails to turn smoothly or if it binds when top shaft
is turned.
(8)
Align key on rear tee box shaft with slot in steering shaft yoke.
(9)
Install yoke on rear tee box shaft with screw and new locknut.
(10)
Align key on front tee box shaft with slot in steering shaft yoke.
(11)
Installl yoke on front tee box shaft with screw and new locknut.
(12)
Align key on top tee box shaft with slot in steering shaft yoke.
(13)
Install yoke on top tee box shaft with screw and new locknut.
Change 2 2-899
|
