|
| |
TM 9-2320-360-20-1
LUG NUT CHECK
(1)
Remove four nuts and wheel cover from tire assembly.
WARNING
After removing the wheel cover, If any
bolts are found loose or broken, deflate
the tire completely before attempting to
loosen lugnuts. Failure to comply may
result In injury to personnel.
(2)
Check if any lugnuts are loose, missing, or damaged.
(3)
Tighten loose lugnuts 450-550 lb ft (610-746 N m).
Replace missing or damaged lugnuts.
(4)
Install wheel cover on tire assembly with four nuts.
Check steering shafts and tie rods for damage,
and loose or missing mounting hardware. Refer to
LO 9-2320-360-12 to lubricate steering linkage.
Change 2 2-897
|
