|
| |
TM 9-2320-360-20-1
Check pitman arm and drag links
for damage, and loose or missing
mounting hardware. Refer to LO
9-2320-360-12 to lubricate
steering linkage.
FRONT STEERING GEAR TEST
(1)
Remove locknut, screw and front steering
shaft yoke from tee box. Discard locknut.
(2)
Start engine (TM 9-2320-360-10).
(3)
Detect steering effort while turning
steering wheel from straight ahead to
full left and full right positions
(4)
Return steering wheel to straight ahead
position
(5)
Shut off engine (TM 9-2320-360-10).
(6)
Align slot on yoke with key on tee box
shaft.
(7)
Install front steering shaft yoke on tee
box with screw and new locknut
REAR STEERING GEAR TEST
(1)
Remove locknut, screw and rear
steering shaft yoke from tee box.
Discard locknut
(2)
Start engine (TM 9-2320-360-10)
(3)
Detect steering effort while turning
steering wheel from straight ahead to
full left and full right positions.
(4)
Return steering wheel to straight ahead
position
(5)
Shut off engine (TM 9-2320-360-10).
(6)
Align slot on yoke with key on tee box
shaft.
(7)
Install rear steering shaft yoke on tee
box with screw and new locknut
2-891
|
