|
| |
TM 9-2320-360-20-1
INFLATION VALVE VOLTAGE TEST
(1)
Disconnect inflation valve connector from
power manifold
(2)
Place positive (+) probe of multimeter on
inflation valve connector, pin 2
(3)
Place negative (-) probe of multimeter on
known good ground
(4)
Turn engine switch to ON position
(TM 9-2320-360-10).
(5)
Move CTI switch to ON position
(TM 9-2320-360-10)
(6)
Press START button and look for 22-28
volts on multimeter
(7)
Turn engine switch to OFF position
(TM 9-2320-360-10)
(8)
Connect inflation valve connector to power
manifold
POWER MANIFOLD GROUND
CIRCUIT CONTINUITY TEST
(1)
Disconnect inflation valve connector
from power manifold
(2)
Place positive (+) probe of multimeter
in inflation valve connector, pin 1.
(3)
Place negative (-) probe of
multimeter on known good ground
and check multimeter for continuity.
(4)
Connect inflation valve connector to
power manifold
DEFLATION VALVE VOLTAGE TEST
(1)
Disconnect deflation valve connector
from power manifold
(2)
Place positive (+) probe of multimeter on
deflation valve connector, pin 2.
(3)
Place negative (-) probe of multimeter on
known good ground.
(4)
Turn engine switch to ON position
(TM 9-2320-360-10)
(5)
Move CTI switch to ON position
(TM 9-2320-360-10)
(6)
Press START button and look for 0 volts
on multimeter
(7)
Turn engine switch to OFF position
(TM 9-2320-360-10)
(8)
Connect deflation valve connector to
power manifold
2-873 (2-874 blank)
|
