|
| |
TM 9-2320-360-20-1
NOTE
Tire must be deflated to 60 psi (414
kPa) or less to perform this test.
(1)
Remove four nuts and wheel cover
(2)
Start engine (TM 9-2320-360-10).
(3)
Set CTIS controller selector to
HIGHWAY position
(TM 9-2320-360-10)
(4)
Move CTIS switch to ON position and/or
push start button (TM 9-2320-360-10)
(5)
Check CTIS hoses from wheel hub to
CTIS wheel valve for air leaks, damage,
or crimps
(6)
Shut off engine (TM 9-2320-360-10)
NOTE
Tire must be deflated to 60 psi (414
kPa) or less to perform this test.
(1)
Start engine (TM 9-2320-360-10).
(2)
Set CTIS controller selector to
HIGHWAY position
(TM 9-2320-360-10)
(3)
Move CTIS switch to ON position and/or
push start button (TM 9-2320-360-10).
(4)
Check CTIS tubes from wheel valve to
tire for air leaks, damage, or crimps
(5)
Shut off engine (TM 9-2320-360-10)
Change 3 2-855.1 (2-856 and 2-857 blank)
|
