|
| |
TM 9-2320-360-20-1
NOTE
Air system pressure must be 120 psi (827
kPa) before beginning troubleshooting. If
air pressure gage does not indicate 120 psi
(827 kPa), wait for system air pressure to
build before beginning troubleshooting.
CTIS air lines are pressurized only when
CTIS is in inflate, deflate, or test cycles.
Refer to Servicing Tires, (TM 9-2320-380-10).
(1)
Remove release valve
(para 7-70).
(2)
Inspect valve assembly
for broken springs,
damaged diaphragm,
sticking, or any other
physical damage
(3)
Install release valve
(para 7-70).
Change 1 2-853
|
