|
| |
TM 9-2320-360-20-1
WARNING
Jewelry can catch on equipment and cause
injury or short across electrical circuit and cause
severe bums or electrical shock. Remove rings,
bracelets, watches, necklaces, and any other
jewelry before working around HET Tractor.
DEFLATION VALVE VOLTAGE TEST
(1)
Disconnect deflation valve connector from power
manifold
(2)
Place positive (+) probe of multimeter on deflation valve
connector, pin 2.
(3)
Place negative (-) probe of multimeter on known good
ground
(4)
Turn engine switch to ON position (TM 9-2320-360-10).
(5)
Move CTIS switch to ON position (TM 9-2320-360-10).
(6)
Press START button and look for 0 volts on multimeter.
(7)
Turn engine switch to OFF position
(TM 9-2320-360-10)
(8)
Connect deflation valve connector to power manifold.
(1)
Remove release valve (para 7-70).
(2)
Inspect valve assembly for a broken
spring, damaged diaphragm, sticking,
or any other physical damage.
(3)
Install release valve (para 7-70)
(1)
Remove deflation valve (para 7-68)
(2)
Inspect valve assembly for a broken
spring, damaged diaphragm, sticking,
or any other physical damage.
(3)
Install deflation valve (para 7-68).
Change 1 2-851.6
|
