| |
TM 9-2320-360-20-1
(1) WARNING
Jewelry can catch on equipment
and cause Injury or short across
electrical circuit and cause severe
burns or electrical shock. Remove
rings, bracelets, watches,
necklaces, and any other Jewelry
before working around HET
Tractor.
NOTE
Air system pressure must be 120 psi
(827 kPa) before beginning
troubleshooting if air pressure gage
does not indicate 120 psi (827 kPa),
wait for system air pressure to build
before beginning troubleshooting.
Inspect CTIS power manifold and controller to
see that all connectors are fully plugged in
(2) WARNING
·
Wear safety goggles when
performing leakage tests on
valves air hoses. Failure to
comply may cause serious eye
injury due to high air pressure.
·
Loosen but do not remove air
line. Failure to comply may
result in air line blowing off,
causing Injury to personnel.
(1)
Loosen air line no 2100 at porting
block to check for air pressure.
(2)
Check air lines and fittings from air
reservoir no I to porting block for
leakage or damage.
Change 1 2-841
|