|
| |
TM 9-2320-360-20-1
LUGNUT CHECK
(1)
Remove four nuts and wheel cover from tire
assembly.
(1) WARNING
After removing the wheel cover, If
any bolts are found loose or
broken, deflate the tire
completely before attempting to
loosen lugnuts. Failure to
comply may result In injury to
personnel.
(2)
Check if any lugnuts are loose, missing, or
damaged
(3)
Tighten loose lugnuts 450-550 lb ft (610-746 N m ).
(4)
Install wheel cover on tire assembly with four nuts
WHEEL RUNOUT CHECK
(2) WARNING
HET Tractor must be on level
ground and wheels must be
chocked before parking brake
is released. Otherwise, HET
Tractor may roll and cause
personnel Injury.
(1)
Jack up HET Tractor (TM 9-2320-360-10) one
wheel at a time.
NOTE
Perform steps (2) and (5) only if
working on rear three axles
(2)
Manually release spring brake (TM 9-2320-360-10).
(3)
Rotate tire to check for bent wheel.
(4)
Lower HET Tractor (TM 9-2320-360-10).
(5)
Manually apply spring brake (TM 9-2320-360-10)
Change 2 2-809
|
