|
| |
TM 9-2320-360-20-1
WINDSHIELD WASHER
SOLENOID VALVE TEST
NOTE
Air pressure must be at
least 65 psi (448 kPa) to
perform test.
(1)
Remove clip and rubber hose from
windshield washer solenoid valve.
(2)
Turn ENGINE switch to ON
(3)
Press windshield washer switch and check
for air at outlet port of windshield washer
solenoid valve.
(4)
Turn ENGINE switch to OFF.
(5)
Install rubber hose on windshield washer
solenoid valve with clip.
Change 2 2-785
|
