|
| |
TM 9-2320-360-20-1
(1)
Drain air system to less than 100 psi (690 kPa)
(2)
Start engine (TM 9-2320-360-10)
WARNING
Keep out from under HET
M1070 during test. Air exits
air dryers at high velocity
during purging. Failure to
comply may result In Injury
to personnel.
(3)
Build air pressure to 120-125 psi (827-862
kPa) and observe for air dryers purging.
(1)
Remove lower engine access panel
(para 16-2)
(2)
Inspect air lines no. 2096, 2080, and
2097 for kinks or other damage
Change 2 2-762.5
|
