|
| |
TM 9-2320-360-20-1
WARNING
·
Batteries
must
be
disconnected
before tightening any connections.
Failure to comply may result in injury
to personnel.
·
Remove all jewelry such as rings,
dog tags, bracelets, etc. If jewelry
contacts electrical terminals a direct
short may result in an instant heating
of tools, damage to equipment, and
injury to personnel.
CAUTION
Batteries must be disconnected before
tightening any connections. Failure to
comply
may
result
in
damaged
equipment.
NOTE
·
Transmission range selector must be
positioned
to
N
(neutral)
and
PARKING BRAKE control pulled out
before PTO will engage. If engine
starts in neutral and reverse lights
operate,
neutral
safety
interlock
circuit is operating properly.
·
Engine must be running and PTO
control switch placed in the ON
position to perform this test.
Check if PTO indicator lights.
PTO SOLENOID VALVE TEST
NOTE
Engine must be running
and PTO control switch
placed in the on position
to perform this test.
(1)
Place positive (+) probe of multimeter on
no. 1719C wire at PTO solenoid valve.
(2)
Place negative (-) probe of multimeter
on ground and look for 22-28 volts on
multimeter.
Change 2 2-685
|
