|
| |
TM 9-2320-360-20-1
WARNING
Jewelry can catch on equipment and cause
injury or short across electrical circuit and
cause severe burns or electrical shock.
Remove rings, bracelets, watches,
necklaces, and any other jewelry before
working around HET Tractor.
REVERSE LIGHT
SWITCH TEST
(1)
Turn ENGINE switch to ON
position.
(2)
Place transmission range
selector to reverse (R).
(3)
Place positive (+) probe of
multimeteron wire no. 1149
at reverse light switch.
(4)
Place negative (-) probe of
multimeter on ground and
look for 10-14 volts on
multimeter.
(5)
Place transmission range
selector to neutral (N).
(6)
Turn ENGINE switch to
OFF position.
Check backup light for
burned out bulb if backup
light does not operate, but
backup alarm sounds.
WIRE NO. 1149 VOLTAGE
TEST
(1)
Turn ENGINE switch to ON
position.
(2)
Place transmission range
selector to reverse (R).
(3)
Place positive (+) probe of
multimeter on wire no. 1149 at
backup light.
(4)
Place negative (-) probe of
multimeter on ground and look
for 10-14 volts on multimeter.
(5)
Place positive (+) probe of
multimeteron wire no 1149 at
backup alarm.
(6)
Place negative (-) probe of
multimeter on ground and look
for 10-14 volts on multimeter.
(7)
Place transmission range
selector to neutral (N).
(8)
Turn ENGINE switch to OFF
position.
Change 1 2-613
|
