|
| |
TM 9-2320-360-20-1
WARNING
Jewelry can catch on equipment and
cause Injury or short across electrical
circuit and cause severe burns or
electrical shock. Remove rings,
bracelets, watches, necklaces, and any
other jewelry before working around
HET Tractor.
BEACON LIGHT SWITCH
TEST
(1)
Turn ENGINE switch to ON
position
(2)
Place beacon light switch in the
on position
(3)
Place positive (+) probe of
multimeter on wire no 1184 at
beacon light switch
(4)
Place negative (-) probe of
multimeter on ground and look for
10-14 volts on multimeter.
(5)
Place beacon light switch in the
off position
(6)
Turn ENGINE switch to OFF
position
Remove fuse from strobe type beacon light
and visually inspect A fuse will usually "blow"
in the center, at the inverted U-shape area
Fuse can also be checked with a multimeter.
Change 3 2-609
|
