|
| |
TM 9-2320-360-20-1
Table 2-1. Preventive Maintenance Checks and Services (Cont)
ITEM TO BE
NOT FULLY
ITEM
INTERVAL
CHECKED OR
PROCEDURE
MISSION
NO.
SERVICED
CAPABLE IF:
10
Semi-
AXLES/
WARNING
(cont)
annually
SUSPENSION
(CONT)
Dry cleaning solvent P-D-680 is toxic and
flammable. Wear protective goggles and
gloves and use only In a well-ventilated area.
Avoid contact with skin, eyes, and clothes,
and don't breathe vapors. DO NOT use near
open flame or excessive heat. The flash
point is 100-138°F (38-59°C). If you become
dizzy while using cleaning solvent, get fresh
air immediately and medical aid. If contact
with eyes Is made, flush your eyes with
water and get medical aid Immediately.
(3) Clean axle breather (1) and
adapter (1.1) with dry cleaning
solvent.
WARNING
Compressed air for cleaning purposes will
not exceed 30 psi (207 kPa). Use only with
effective
chip
guarding
and
personal
protective
equipment
(goggles/
shield,
gloves, etc.).
(4) Dry axle breather (1) and adapter
(1.1) with compressed air.
Change 1 2-31
|
