|
| |
TM 9-2320-360-20-1
WARNING
Jewelry can catch on equipment and cause
Injury or short across electrical circuit and cause
severe bums or electrical shock. Remove rings,
bracelets, watches, necklaces, and any other
jewelry before working around HET Tractor.
Check headlights for burned out bulb if only one
headlight does not operate.
DIMMER SWITCH TEST
(1)
Unplug MC9 connector at headlight
dimmer switch.
(2)
Install jumper wire between pins A and
B of MC9 connector.
(3)
Turn ENGINE switch to ON position.
(4)
Place headlights switch in the ON
position.
(5)
Observe to see if headlights operate on
high beam.
(6)
Place headlights switch in the off
position.
(7)
Turn ENGINE switch to OFF position.
(8)
Remove jumper wire and plug in MC9
connector.
Change 2 2-529
|
