|
| |
TM 9-2320-360-20-1
WARNING
Jewelry can catch on equipment and cause Injury
or short across electrical circuit and cause severe
burns or electrical shock. Remove rings,
bracelets, watches, necklaces, and any other
jewelry before working around HET Tractor.
NOTE
Headlights will not operate if BLACK OUT LIGHTS
switch is in the on position.
HEADLIGHT BULB TEST
(1)
Turn ENGINE switch to ON position.
(2)
Place HEADLIGHT switch in the ON
position.
(3)
Place HEADLIGHT DIMMER switch in the
low beam position (TM 9-2320-360-10).
(4)
Place positive (+) probe of multimeter on
wire no. 1006 at headlight bulb.
(5)
Place negative (-) probe of multimeter on
ground and look for 10-14 volts on
multimeter.
(6)
Place HEADLIGHT DIMMER switch in the
high beam position (TM 9-2320-360-10).
(7)
Place positive (+) probe of multimeter on
wire no. 1007 at headlight bulb
(8)
Place negative (-) probe of multimeter on
ground and look for 10-14 volts on
multimeter.
(9)
Place HEADLIGHT switch in the OFF
position.
(10) Turn ENGINE switch to OFF position.
HEADLIGHTS SWITCH
TEST
(1)
Turn ENGINE switch to ON
position.
(2)
Place headlights switch in the on
position.
(3)
Place positive (+) probe of
multimeter on wire no. 1049 at
headlights switch.
(4)
Place negative (-) probe of
multimeter on ground and look for
10-14 volts on multimeter.
(5)
Place headlights switch in the off
position.
(6)
Turn ENGINE switch to OFF
position.
Change 2 2-521
|
