|
| |
TM 9-2320-360-20-1
WARNING
Jewelry can catch on equipment and cause injury
or short across electrical circuit and cause severe
burns or electrical shock. Remove rings,
bracelets, watches, necklaces, and any other
jewelry before working around HET Tractor.
NOTE
WATER TEMP gage, OIL PRESS gage, TRANS
TEMP gage, T-CASE TEMP gage, BATTERY gage
(12 volt system), and FUEL gage are 12 volt
electric gages.
CIRCUIT BREAKER TEST
(1)
Remove eight screws and panel from
console.
(2)
Turn ENGINE switch to ON position.
(3)
Place positive (+) probe of multimeter
on lower terminal of circuit breaker.
(4)
Place negative (-) probe of multimeter
on ground and look for 10-14 volts on
multimeter.
(5)
Turn ENGINE switch to OFF position.
Remove instrument panel (para 7-13) and check
if cab wire harness is connected securely to
instrument panel wire harness.
2-477
|
