|
| |
TM 9-2320-360-20-1
Verify WATER TEMP gage reading by
comparing It to results from STE/ICE-R Test
#38.
STE/ICE TEST #38
(1)
Connect STE/ICE test cable to STE/ICE
receptacle in cab.
(2)
Set STE/ICE test select switch to “38".
(3)
Start engine (TM 9-2320-360-10).
(4)
Move STE/ICE Zero Offset switch to ON
position.
(5)
Press and hold TEST button until “CAL"
appears in display.
(6)
Release TEST button and wait for offset
value to appear in display.
(7)
Move STE/ICE Zero Offset switch to OFF
position.
(8)
Press and release TEST button to obtain
test results.
(9)
Shut off engine (TM 9-2320-360-10).
Change 2 2-445.1
|
