|
| |
TM 9-2320-360-20-1
WARNING
Fuel is very flammable and can
explode easily. To avoid serious
injury or death keep flame away from
fuel and keep fire extinguisher within
easy reach. When working with fuel,
post signs that read NO SMOKING
WITHIN 50 FEET OF VEHICLE.
NOTE
Perform Engine Troubleshooting (a3,
ENGINE STARTS BUT MISFIRES,
RUNS ROUGH, OR LACKS POWER)
before starting here.
Push in and turn fuel primer pump 1/4 turn in
either direction to release. Pump fuel primer
pump until resistance is felt to purge air from fuel
system. Push in and turn fuel primer pump 1/4
turn in either direction to lock
FUEL SUPPLY TEST
(1)
Remove fuel return line from left side fuel
tank
(2)
Place fuel line in suitable container.
(3)
Start engine (TM 9-2320-360-10).
(4)
Observe fuel flow into container while
assistant operates engine at 2100 rpm
(5)
Shut off engine (TM 9-2320-360-10)
(6)
Install fuel return line from left side fuel tank.
STE/ICE TEST #24
(1)
Connect STE/ICE test cable to STE/ICE
receptacle in cab
(2)
Set STE/ICE test select switch to "24"
(3)
Press and hold TEST button until "CAL"
appears in display
(4)
Release TEST button and wait for offset
value to appear in display.
(5)
Press and release TEST button.
(6)
Start engine (TM 9-2320-360-10) and
observe test results on STE/ICE display.
(7)
Shut off engine (TM 9-2320-360-10)
2-419
|
