Order this information in Print

Order this information on CD-ROM

Download in PDF Format

     

Click here to make tpub.com your Home Page

Page Title: FUEL SYSTEM TEST
Back | Up | Next

Click here for a printed version

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Combat
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
USMC
   
Products
  Educational CD-ROM's
Printed Manuals
Downloadable Books
   

 

TM 9-2320-360-20-1 WARNING Fuel is very flammable and can explode easily.  To avoid serious injury or death keep flame away from fuel and keep fire extinguisher within easy reach. When working with fuel, post signs that read NO SMOKING WITHIN 50 FEET OF VEHICLE. NOTE Fuel lines and fittings may be loose allowing air to be drawn into fuel system. Check fuel lines and fittings for leaks and damage. FUEL SYSTEM TEST (1) Remove fuel return line from left fuel tank (2) Place fuel line in suitable container. NOTE Fuel pump should deliver approximately 6 oz (177cc) of fuel in 15 seconds at cranking speed (3) Observe fuel flow from return line while assistant attempts to start engine (TM 9-2320-360-10) (4) Install fuel return line on left fuel tank. STE/ICE TEST #24 (1) Connect STE/ICE test cable to STE/ICE receptacle in cab. (2) Set STE/ICE test select switch to '24'. (3) Press and hold TEST button until 'CAL" appears in display. (4) Release TEST button and wait for offset value to appear in display. (5) Press and release TEST button. (6) Start engine (TM 9-2320-360-10) and observe test results on STE/ICE display. (7) Shut off engine (TM 9-2320-360-10) 2-417

Privacy Statement - Press Release - Copyright Information. - Contact Us - Support Integrated Publishing

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business