|
| |
TM 9-2320-360-20-1
WARNING
Fuel is very flammable and can
explode easily. To avoid serious
injury or death keep flame away
from fuel and keep fire
extinguisher within easy reach.
When working with fuel, post
signs that read NO SMOKING
WITHIN 50 FEET OF VEHICLE.
NOTE
Perform Engine Troubleshooting
(a2, Engine Cranks but Fails to
Start) before starting here.
FUEL SYSTEM TEST
(1)
Remove fuel return line from left fuel tank
(2)
Place fuel line in suitable container.
NOTE
Fuel pump should deliver
approximately 6 oz (177cc) of
fuel in 15 seconds at cranking
speed
(3)
Observe fuel flow from return line while
assistant attempts to start engine (TM
9-2320-360-10)
(4)
Install fuel return line on left fuel tank
STE/ICE TEST #24
(1)
Connect STE/ICE test cable to STE/ICE
receptacle in cab
(2)
Set STE/ICE test select switch to "24".
(3)
Press and hold TEST button until 'CAL"
appears in display.
(4)
Release TEST button and wait for offset
value to appear in display
(5)
Press and release TEST button
(6)
Start engine (TM 9-2320-360-10) and
observe test results on STE/ICE display.
(7)
Shut off engine (TM 9-2320-360-10).
Check for clean fuel in fuel water
separator and separator bowl for
leaks or damage.
2-415
|
