|
| |
TM 9-2320-360-20-1
NOTE
Results for STE/ICE-R Test #28
must be obtained at 2100 rpm.
RESTRICTION INDICATOR CHECK
(1)
Check reading on AIR CLEANER
RESTRICTION INDICATOR
(2)
Press RESET button on AIR CLEANER
RESTRICTION indicator if reading is
between 15 and 20 (in yellow area) or above
20 (in red area).
(3)
Start engine (TM 9-2320-360-10) and
check AIR CLEANER RESTRICTION
INDICATOR again.
STE/ICE TEST #28
(1)
Connect STE/ICE test cable to STE/ICE
receptacle In cab
(2)
Set STE/ICE test select switch to '28'.
(3)
Start engine (TM 9-2320-360-10)
(4)
Press and hold TEST button until 'CAL"
appears in display
(5)
Release TEST button and wait for offset value
to appear in display.
(6)
Increase engine speed to approximately 2100
rpm.
(7)
Press and release TEST button to obtain test
results
(8)
Shut off engine (TM 9-2320-360-10)
2-403
|
