|
| |
TM 9-2320-360-20-1
WARNING
Antifreeze may be very hot and under
pressure from engine operation.
Ensure engine is cool before
performing maintenance. Failure to
comply may cause serious personnel
injury.
CAUTION
Engine oil must be changed whenever
there is evidence of oil breakdown or
contamination Oil breakdown or
contamination may be caused from
overheating engine and Is indicated by
discoloration, strong odor, and oil
analysis.
Coolant should be visible in sight glass.
NOTE
STE/ICE-R Test #37 measures
oil temperature, STE/ICE-R
Test #38 measures engine
coolant temperature
Verify water temperature gage reading
with STE/ICE-R Test #38.
STE/ICE TEST #38
(1)
Connect STE/ICE test cable to STE/ICE receptacle
in cab
(2)
Set STE/ICE test select switch to "38".
(3)
Start engine (TM 9-2320-360-10).
(4)
Move STE/ICE Zero Offset switch to ON position
(5)
Press and hold TEST button until 'CAL' appears in
display
(6)
Release TEST button and wait for offset value to
appear in display
(7)
Move STE/ICE Zero Offset switch to OFF position
(8)
Press and release TEST button to obtain test
results
(9)
Shut off engine (TM 9-2320-360-10)
Change 1 2-401
|
