|
| |
TM 9-2320-360-20-1
CONTINUITY TEST
(1)
Remove jumper wire.
(2)
Read resistance between
sockets D1 and C3 on vehicle
harness connector.
(3)
Read resistance between socket
D1 and a good ground.
CONTINUITY TEST
(1)
Disconnect vernier control.
(2)
Read resistance between
sockets A3 and C3 on vehicle
harness connector.
(3)
Read resistance between
socket A3 and a good ground.
Check terminals (sensor side and harness
side) for damaged, bent, corroded, and
unseated pins or sockets
2-345
|
