|
| |
TM 9-2320-360-20-1
CONTINUITY TEST
(1)
Turn ENGINE switch OFF and
remove all jumpers from 12-pin
DDL connector.
(2)
Place jumper across pins J and K
on 12-pin DDL connector.
(3)
Unplug vehicle harness connector
and measure resistance between
sockets C1 and C2.
CONTINUITY TEST
(1)
Remove jumper wires from
12-pin DDL connector.
(2)
Read resistance between
sockets C1 and C2 of
vehicle harness connector.
CONTINUITY TEST
(1)
Remove all jumpers from
12-pin DDL connector.
(2)
Measure resistance between
sockets J and A, then J and
H next.
(3)
Measure resistance between
sockets K and A, then K and
H of DDL connector.
2-317
|
