|
| |
TM 9-2320-360-20-1
NOTE
Battery voltage surges
while cranking may
blank out or reset DDR.
(1)
Check for proper SRS signal.
(2)
Select MISC STATUS on DDR (MODE
31).
(3)
Crank engine while observing DDR
display of "SRS RECEIVED".
CONTINUITY TEST
(1)
Turn ENGINE switch OFF.
(2)
Disconnect engine harness
connector at ECM.
(3)
Read resistance between sockets S1
and S2 at engine harness connector.
CONTINUITY TEST
(1)
Turn ENGINE switch OFF.
(2)
Disconnect both 5-way injector
harnesses at ECM connector.
(3)
Read resistance between injector
return pin and all the power driver
pins on both harness connectors
(example G-L, and E-A).
2-301
|
