|
| |
TM 9-2320-360-20-1
(1) Plug in DDR (p. 2-66).
(2) Turn ENGINE switch to ON (TM 9-2320-360-10).
(3) Select Modes 02 (Historical codes) and 38 (Engine
Hours) for display.
(4) At least part of the display will look like the following
example ( There will be more display if more codes
are logged in addition to code 85):
Line 1 =
85 ENG OVERSPEED
02
Line 2 =
352 START HR
02
Line 3 =
15 SECONDS
02
Line 4 =
1 OCCUR
02
Line 5 =
368 ENG HOURS
38
This is what the display means:
Line 1 =A Code 85, engine overspeed was logged It is being displayed
as part of the Mode 02 display.
Line 2 =The Code 85 condition was first seen at 352 engine hours (the
number of hours the engine has been In use since coming off the
assembly line).
Line 3 =The total duration of Code 85 conditions logged was 15 seconds.
Line 4 =Only 1 continuous occurrence of Code 85 took place.
Line 5 =The total number of engine hours at this time is 368 Subtracting
line 2 from line 5 (368-352= 16), means that the first Code 85
condition occurred 16 engine hours ago.
Change 1 2-265.2
|
