|
| |
TM 9-2320-360-20-1
NOTE
The following flow chart should only be
used if DDEC troubleshooting was started
on p. 2-80 and you were referred here.
FUEL RETURN LINE TEST
(4)
Remove fuel return line from left side fuel
tank.
(5)
Place fuel line in suitable container.
(6)
Attempt to start engine (TM 9-2320-360-10).
(7)
Inspect fuel for air contamination.
(8)
Install fuel return line on left side fuel tank.
NOTE
Engine
must
be
running
to
perform this test.
(1) Check 24 volt battery gage for 24-28
volts dc.
(2) Check 12 volt battery gage for 12-14
volts dc.
(1) Remove left inner fender (para 16-34).
(2) Inspect
ground
cable
for
loose
hardware,
breaks
and
dean
connections.
Change 1 2-265
|
