TM 9-2320-360-20-1 CAUTION Use jumper wire only between terminals indicated.  Failure to comply may     result     in     damage     to     DDEC components or wiring. Table 2-8.  Injector Harness Connector Identification INJECTOR INJECTOR HARNESS HARNESS CONNECTOR CONNECTOR CODE SOCKET SOCKET 61 L G 62 A E 63 K G 64 B E 65 H G 66 D E 67 J G 68 C E CONTINUITY TEST (1) Turn ENGINE switch OFF and unplug DDR. (2) Disconnect both 5-way Injector harness connectors at the ECM. (3) Referring to Table 2-8, read resistance between the 5-way Injector harness connector sockets associated with the 61-68 code received (Example read resistance between sockets G and L for Code 61.) CONTINUITY TEST (1) Remove rocker arm cover (para 3-2) corresponding to injector identified by Table 2-7. (2) Disconnect the two wires of the injector identified Short these two wires together. (3) Referring to Table 2-8, read the resistance between the 5-way injector harness connector sockets associated with the faulty Injector. CONTINUITY TEST (1) Remove rocker arm cover (para 3-2) corresponding to injector identified by Table 2-7. (2) Disconnect two wires of Injector indicated. (3) Referring to Table 2-8, read the resistance between 5-way injector harness connector sockets associated with faulty injector. 2-255