|
| |
TM 9-2320-360-20-1
CAUTION
Use jumper wire only between
terminals indicated. Failure to
comply may result in damage
to
DDEC
components
or
wiring.
CONTINUITY TEST
(1)
Install a jumper wire between
sockets A and B of TRS
harness connectors.
(2)
Read resistance between
sockets T1 and T2 of engine
harness connector.
CONTINUITY TEST
Read resistance of TRS
across sensor pins A and B.
Check
connectors
at
SRS
(both harness side and SRS
side)
for
damage;
bent,
corroded, and unseated pins or
sockets, or bad contacts.
2-223
|
