|
| |
TM 9-2320-360-20-1
CAUTION
Use
jumper
wire
only
between
terminals
indicated.
Failure
to
comply
may
result
in
damage
to
DDEC
components or wiring.
CONTINUITY TEST
(1)
Install a jumper wire
between sockets A and B of
SRS harness connectors.
(2)
Read resistance between
sockets S1 and S2 of
engine harness connector.
CONTINUITY TEST
Read resistance of SRS
across sensor pins A and B.
Check connectors at TRS (both
harness side and TRS side) for
damage, bent, corroded, and
unseated pins or sockets, or
bad contacts.
2-211
|
