|
| |
TM 9-2320-360-20-1
1-9. METRIC SYSTEM
The equipment described herein contains metric components and requires metric common and special tools, therefore,
Metric units in addition to English units will be used throughout this manual. An English-to-metric conversion table is
included inside the back cover of this manual.
Section II. EQUIPMENT DESCRIPTION AND DATA
1-10. EQUIPMENT CHARACTERISTICS, CAPABILITIES, AND FEATURES
Refer to TM 9-2320-360-10, for equipment characteristics, capabilities, and features.
1-11. LOCATION AND DESCRIPTION OF COMPONENTS
Refer to TM 9-2320-360-10, for location and description of components.
1-12. EQUIPMENT DATA
Refer to TM 9-2320-360-10, for equipment data.
1-13. SAFETY, CARE, AND HANDLING
Significant Hazards and Safety Recommendations. Significant hazards and safety recommendations are listed in
table 1-2.
Table 1-2. Significant Hazards and Safety Recommendations
Operating Hazard
Safety Recommendation or Precaution
Condition*
Low oil pressure/
Stop engine operation when CHECK GAUGES
Abnormal
high coolant temperature
and CHECK ENGINE indicators are lit, engine
warning alarm sounds, and gages indicate
abnormal readings.
Low air pressure
Do not drive HET Tractor while low air
Abnormal
pressure alarm is sounding or LOW AIR
indicator is lit.
Electric shock
Do not wear watches, rings, or other
Abnormal
jewelry while working on or near an
electrical circuit.
Refueling vehicle
Fuel is very flammable and can explode easily
Normal
To avoid serious injury or death, keep fuel away
from open flame and keep fire extinguisher within
easy reach when working with fuel. Do not work
on fuel system when engine is hot. Fuel can be
ignited by hot engine. When working with fuel,
post sign that says: NO SMOKING WITHIN 50
FEET OF VEHICLE.
*Category of hazards as to whether or not they may be expected under normal or abnormal operating conditions.
1-3
|
