|
| |
TM 9-2320-360-20-1
(1)
Reconnect all connectors.
(2)
Turn ENGINE switch ON and
clear codes.
(3)
Start engine.
(4)
Run engine for one minute
or until CHECK ENGINE
indicator comes ON.
(5)
Stop engine and read active
codes.
Inspect OPS and terminals at OPS
connectors (sensor side and harness
side) form damage; bent, corroded, and
unseated pins or sockets.
(1)
Turn ENGINE switch
OFF.
(2)
Reconnect all harness
connectors.
(3)
Turn ENGINE switch ON
and observe CHECK
ENGINE indicator.
2-193
|
