|
| |
TM 9-2320-360-20-1
Inspect terminals at vernier control connector
(sensor side and harness side) for damage,
bent, corroded, and unseated pins or sockets
WARNING
Jewelry can catch on equipment and
cause injury or short across electrical
circuit and cause severe burns or
electrical shock. Remove rings. bracelets,
watches, necklaces, and any other jewelry
before working around HET Tractor.
VOLTAGE TEST
(1) Remove jumper.
(2) Turn ENGINE switch ON.
(3) Read voltage on vernier control harness
connector between sockets C and A.
2-109
|
