|
| |
TM 9-2320-360-20-1
RESISTANCE TEST
(1)
Remove all jumpers from 12-pin DDL connector.
(2)
Measure resistance between sockets J and A,
then J and H next Measure resistance between
sockets K and A, then K and H of DDL
connector.
(1)
Connect DDR to another engine
(2)
Read PROM ID or any other parameter in menu.
(1)
Turn ENGINE switch OFF.
(2)
Reconnect all harness connectors.
(3)
Turn ENGINE switch ON and observe
CHECK ENGINE indicator.
2-105
|
