|
| |
TM 9-2320-360-20-1
WIRE # 451 CONTINUITY TEST
(1)
Turn
ENGINE
switch
to
OFF
position
(TM 9-2320-360-10).
(2)
Remove the vehicle harness connector from
the ECM.
(3)
Place positive (+) probe of multimeter on pin A
of DDL connector.
(4)
Place negative (-) probe of multimeter on pin M
of DDL connector and note reading on
multimeter.
(1)
Remove the 6-way power harness from the
ECM.
(2)
Check the 6-way power harness connector
and the vehicle harness connector (both the
ECM and harness side) for damage, bent,
corroded, and unseated pins or sockets.
2-87
|
