|
| |
TM 9-2320-360-20-1
8.
Trip GAL (estimated total fuel used since reset).
(d)
Fuel Information. Not applicable.
(e)
Injector Response Times. Click on "Injector Response Times". The DDEC Injector Response Time
Window will be displayed.
(f)
Clear ECM Actions. Click on "Clear ECM Action". A pop up window will be displayed verifying the
step. Click on "OK" to clear all ECM actions, click on "CANCEL" to return to the main window.
(g)
Clear Historical Codes. Click on "Clear Historical Codes". A pop up window will be displayed
verifying the step. Click on "OK" to erase all historical codes, click on "CANCEL" to return to the main
window.
(h)
Clear Trip Accumulators. Not applicable.
(i)
Cylinder Cutout Function.
1.
Click on "Cylinder Cutout".
2.
Click on "Auto" or "1000 RPM". If "AUTO" is selected, the ECM will automatically cutout one
cylinder at a time and the test results will be displayed as they occur. If "MANUAL" is
selected, the operator must select the individual cylinder to be cutout.
3.
Click on "Idle" or "1000 RPM".
4.
Click on "Start", "Stop" or "Cancel". Selecting "Start" will change display to "Re-Start", and
function will run until either "Stop" or "Cancel" is selected. If "Stop" is selected, the
function will stop and "Re-Start" will change back to "Start. If "Cancel" is selected, the
function will stop and the operator will be returned to the main menu.
Change 2 2-71
|
