|
| |
TM 9-2320-360-20-1
Check hydraulic hoses and fittings for
leakage or damage
KICKOUT CONTROL VALVE TEST
NOTE
AIR PRESS gage must read
at least 65 psi (448 kPa)
before winch kickouts will
operate
(1)
Start engine (TM 9-2320-360-10) and run until AIR
PRESS gage indicates at least 65 psi (448 kPa)
(2)
Remove two air lines from winch kickout
(3)
Engage winch kickout control Air should escape
from outside air line.
(4)
Disengage winch kickout control Air should escape
from inside air line.
(5)
Replace kickout control valve (para 17-2) if it does
not operate properly.
(6)
Install two air lines on winch kickout if kickout
control valve operates properly
2-945
|
