|
| |
TM 9-2320-356-BD
11. Connect the required length of commo wire (up to 15 miles) between the two
telephones.
12. Set the selector switch S1 on both telephones to LB to enable DC switching from
the push-to-talk switch.
.
13. Connect the dc plug from the remote unit into the 6A-4386 battery (AN/PRC-77
battery).
14. Turn on radio.
15. Adjust the 5000-ohm potentiometer so that the K-1 relay energizes when the
push-to-talk switch on the remoted TA-312 is pressed.
16. Check operation.
17. Record BDAR action taken.
When the mission is complete, as soon as
practicable,
repair using standard maintenance procedures.
15-30
|
