|
| |
TM 9-2320-356-BD
3.
Connect the jumper wire from the red wire connection to one of the outside
jacks (point C) on the Soviet chestplate.
4.
Connect the jumper wire from the green wire connection to the other outside
jack (point D).
5.
Connect a jumper wire, 2 feet long,
to the ground (-) side of an 8-ohm speaker
(RT-524, for example).
6.
Connect a jumper wire, 2 feet long,
to the positive (+) side of the speaker.
7.
Connect the jumper wire from the ground side of the speaker to one of the
inside jacks (point A) on the soviet chestplate.
8.
Connect the jumper wire from the positive side of the speaker to the other
inside jack (point B).
9.
Hook the soviet chestplate to the intercom connection on the front of the
soviet radio.
10. Connect battery ground.
11. Test radio operation. Refer to paragraph 15-16.
12. Record BDAR action taken.
When the mission is complete, as soon as
practicable,
repair using standard maintenance procedures.
15-24
|
