|
| |
TM 9-2320-356-BD
6.
Jumper the red and the white wires to the positive side of the Soviet power
supply (Point A).
Use a jumper cable of at least 12-gauge wire.
7.
Jumper the black and the green wires to the negative side of the power supply
(Point B).
Use a jumper cable of at least 12-gauge wire.
8.
Install the R-123M onto the mount and secure.
9.
Splice the Soviet coaxial cable to the antenna coaxial cable.
10. Connect the coaxial cable to the antenna connection point located on the right
side of the R-123M, immediately below the AHTEHHA sign.
11. Connect a microphone and speaker to the radio using one of the following
options:
15-20
|
