|
| |
TM 9-2320-356-BD
CAUTION
Care must be taken to ensure debris or foreign
particles are removed from hydraulic fluid. It
may be necessary to strain fluid with
cheesecloth or a clean rag.
4.
Check fluid level.
Refer to appendix D for compatible replacement fluids, if
necessary.
5.
Record the BDAR action taken.
When the mission is completed, as soon as
practicable,
repair using standard maintenance procedures.
Option 2:
Damage on Flat Surface.
1.
Clean area around holes or cracks.
2.
Flatten protruding reservoir material.
3.
Place piece of rubber over damaged area.
4.
Place heavy-gage can over rubber so
that it completely covers hole.
5.
Tie nylon rope around reservoir and
over can as tightly as possible.
6. Insert metal bar between rope and
reservoir on any convenient side.
14-10
|
